UV/LED Lamp for Curing GALAXY100 24W

  • Code: 23583
UV/LED Lamp for Curing GALAXY100 24W

UV/LED Lamp for Curing GALAXY100 24W

  • Code: 23583
4.300,00 RSD

Reservation
Reservation
4.300,00 RSD

Reservation
Reservation

GALAXY100 lamp for curing UV and LED products.

Because of it's technical characteristics, the device is recommended as well as for personal use.

Note:
During usage, pay attention that the diodes within the lamp, positioned in the shape of letter "U", must be above the nail bed.


Thanks to the ability to simultaneously broadcast both light-emitting diodes of 365nm (nanometer) and 405nm (nanometer), it is designed for quick drying:

  • UV and LED / UV building gels
  • UV and LED / UV colored gels
  • UV and LED / UV permanent varnishes
  • UV and LED / UV end layers (matte or shiny)
  • Like other UV and LED / UV products

FEATURES:

  • Maximum lamp power: 24W
  • Input mode: AC 100-240V, 50 / 60Hz, 0.5A
  • Output mode: DC 24V 0.65A
  • Dimensions: 210 mm x 120 mm x 80 mm
  • Timer: 60s/90s
  • Automatic sensor: 30s

CONTENTS OF THE BOX:

  • GALAXY100 UV/LED lamp
  • Adapter DC 24V
  • Transport protective components
  • User manual

Connect the adapter to the device and connect the device to the adequate power supply. Immediately after connecting the device to an electric circuit a sensor becomes active, activating the diodes under the lamp once a hand or a foot is placed underneath, operating for 30 seconds. Once the hand or the foot are removed from the area, the light emission stops.

Pressing a button on the upper part of the device allows a choice of three different operation modes:

  • The first press of the button activates a 60 second timer (a light indicator on the top of the device is lit, signaling which mode is active). After 60 seconds, the diodes are turned off and the device switches to the initial operation mode
  • The second press of the button activates a 60 second timer. After 90 seconds, the diodes are turned off and the device switches to the initial operation mode
  • The third press of the button switches the device back to the initial operation mode, the same as when the device gets connected to the power supply